型号含义 Model implication

适用范围 Applications
1. 适用于爆炸性气体环境1区、2区；
2. 适用于IIA、IIB、IIC级爆炸性气体环境；
3. 适用于温度组别为T1～T6的环境；
4. 适用于石油采炼、储存、化工、医药、军工及军事设施等爆炸性危险环境；
5. 主要用于化学反应容器照明；
6. 支架式安装时可用作小范围投光照明；
7. 采用高亮节能LED光源，低能耗、长寿命、免维护；
8. 充分考虑现场使用需求，特设磁控开关，具有延时关断和触控关断两种控制方式。
1. It is applicable for zone 1 and zone 2 in explosive gas atmosphere;
2. It is applicable for explosive gas atmosphere CAT. IIA, IIB and IIC;
3. It is applicable for temperature groups T1-T6.
4. It is applicable for dangerous explosive locations such as oil exploitation, petroleum refining and storage, chemical industry,medical industry, war industry, military installation, etc;
5. It is applicable for lighting of chemical reaction vessels;
6. It is applicable for small-scale projection lighting when it adopts rack mounting;
7. It adopts high-brightness energy-saving LED light source, with low power consumption, long service, and maintenance free;
8. Fully consider the field using demands, it is especially equipped with magnetic control switch that has time-delay turn off and touch-control turn off two modes.
产品特点 Features
1. 外壳采用铝合金高压铸造成型，表面经抛丸后高压静电喷塑；
2. 防爆等级高，外形轻巧美观；
3. 采用高亮度节能LED作为光源，绿色环保，具有低能耗、长寿命、免维护等优点；
4. 针对危险环境下的化学反应容器或特定地点。专门设计磁控开关；
5. 开关内置，用户不需另配专用防爆照明开关；
6. 具有延时关断和触控关断两种控制方式，延时时间可根据用户要求定制；
7. 根据不同的使用场所，此灯具还可作小范围的投光照明，极具灵活性；
8. 内部电路设有短路保护功能；
9. 优良的密封结构设计，防水防尘性能好；
10. 钢管或电缆布线。
1.The shell is made of aluminum alloy by means of high-pressure casting, and the surface is treated with high-pressure static powder coating after shot blasting.
2.High explosive-proof grade, elegant appearance;
3.Adoption of high-brightness LED as the light source, it is featured with environmental friendly, low power consumption, long service life, maintenance free, etc;
4.It is applicable for chemical reaction vessels or special locations in dangerous environment, with special magnetic control switch;
5.Built-in switch, need not additional explosion-proof lighting switch;
6.With time-delay turn off and touch-control turn off two modes,the delay time can be custom-made according to users' requirements;
7.It also can be used as small-scale projection lighting for some applications, with good flexibility;
8.The internal circuit is equipped with short-circuit protection function;
9.Excellent seal structure design, with good watertight and dustproof performances;
10.Steel pipe or cable wiring.
主要技术参数 Main technical parameters
执行标准：:GB 3836.1、GB 3836.2、IEC60079
防爆标志：:ExdIICT6
额定电压：:AC 36/110/220V
光源：高亮度LED
额定功率：≤3W
延时关断时间：5min、10min
防护等级：IP66
防腐等级：WF1
引入口规格：G1/2"
适用电缆外径：Φ6mm～Φ10mm
Executive standard: GB 3836.1、GB 3836.2、IEC60079
Ex-mark：:ExdIICT6
Rated voltage：:AC 36/110/220V
Light source：LEDLight source
Rated power：≤3W
Time-delay turn off time：5min、10min
Protection grad：IP66
Corrosion-proof-class：WF1
Entry spec.：G1/2"
Cable's outer diameter：Φ6mm～Φ10mm

外形及安装尺寸 Outlines ＆ installation dimensions

订货须知 Order note
1. 用户需延时1-5min产品出厂整定为5min；需延时6-10min产品出厂整定为10min。如需延时10min以上产品订货时请注明。
2. 额定电压如有特殊要求请注明。
例：若需订购立式安装的DED51-LED防爆视孔灯，额定电压为AC110。由灯体开关控制延时5min关断，则订货型号为DED51-LED-AC110/B5L。
1.  Factory default for products with time delay 1-5min is set as 5min; for products with time delay 6-10min is set as 10min. Please specify clearly if require the time delay more than 10min.
2. Please specify clearly for special requirements on rated voltage.    e.g: if need a vertically installed DED51-LED explosion-proof inspection hole lamp, rated voltage is AC110, with lamp body switch control, turn off after a delay of 5min, then the order model should be DED51-LED-AC110/B5L.